This specific page is the requests page for the Illustration Workshop. Anyone can make a request for an illustration to be created or improved. The standard format for making a request is shown below, along with general advice, and should be followed. Many charts and graphs on the web are in the public domain. See Template:PD-chart; no need to create another free chart here if it already exists on the web.
Make a request
Show manual procedures
Use the following template when making a new request, replacing the examples with your image(s) and request(s):
<gallery>
IMAGENAME.EXT|Description of image
IMAGE#TWO.EXT|2nd image (If there is one)
ETCETCETC.EXT|Don't request too many at once, though
</gallery>
;Request:
: Details of your request go here… --~~~~
;Graphist opinion(s):
SpBotarchives all sections tagged with {{Section resolved|1=~~~~}} after 7 days and sections whose most recent comment is older than 60 days. For the archive overview, see /Archive. The latest archive is located at /Archive/2026.
Coats of arms of the Kabardino-Balkar ASSR and of the Mordovian ASSR
@Youseefr 99 Thank you sincerely for quoting my request. By the way, the vectorized image of the national emblem of Kabardino-Balkar ASSR should be made based on the emblem of Kalmyk ASSR, since the formatting of all text above the shield is closer between the two. Boston Mayflower (talk) 09:26, 26 December 2025 (UTC)[reply]
Graphist opinion(s)
Request taken by Bpmcneilly (talk) 02:31, 17 January 2026 (UTC) - @Boston Mayflower: we should be good on the Mordovian ASSR emblem (or, if there are tweaks we can handle it in the request above), correct? Also, for Kabardino-Balkar emblem, I'm assuming I can use the text in the description of the raster version for my SVG? I'm trying to clarify now because I see some of these other requests mention incorrect text in other emblems.[reply]
Don't get desperate, sometimes certain files are trickier than they thought. I found out the hard way. I'm only commenting so the bots won't archive it without solving. Candidyeoman55 (talk) 20:10, 27 February 2026 (UTC)[reply]
@Candidyeoman55: Can you explain why you keep doing this on every request? You don’t even make a selection! And you do it without being asked, even in other people’s requests.
You add a ping to the request to prevent automatic archiving.
This archiving function was carefully set up on this project page: if there has been no post on a topic for more than 60 days, it is assumed that the topic remains unresolved and it will be archived.
Please stop doing this.
I am asking you again:
Either you actively help work on the requests yourself and edit graphics or create new ones as described by the requesters.
Or you submit your own requests.
Mass requests are unusual.
Normally, new requests are submitted only after the previous one has been completed.
What is not necessary and should therefore be avoided:
Marking completed requests for archiving immediately.
Intentionally and generally preventing automatic archiving.
Taking part in other people’s requests with small talk without contributing anything meaningful: no unsolicited micromanagement. Usually, the requester has the best overview and knowledge of the topic. Usually, they can judge themselves whether the request has been sufficiently fulfilled. And usually, they know which related topics are still open and which do not need further work. It is also normal to give them time to review a completed request and, ideally, trigger the archiving themselves.
The text must always be green (even when it is white in the JPG file), specifically this color: #002623.
In some cases, the Syrian emblem and the text are not centered but aligned to the right; however, in the SVG version they should be centered, like all the others.
The only exception is the last logo, which is slightly different from the others and must be kept exactly as it is in the SVG.
In other words, image number 1 can be used as an example of how all the others should be made, except for the last one.
The background must always be transparent. In the SVG, include only the emblem and the text in Arabic and in English.
@Cypp0847: Hi, I've added it as part of the image descriptions. As for the typeface, I’m not sure, but it should be the one the Syrian government has been officially using since 2025, so it shouldn’t be too hard to find. --Yeagvr (talk) 21:41, 17 March 2026 (UTC)[reply]
Your PNG's will make it easy to convert to SVG. Unfortunately I'm quite busy at the moment. I'll return in a few days and begin on it :) Abemos (talk) 10:13, 9 February 2026 (UTC)[reply]
Emblem of the Kazakh Soviet Socialist Republic (1940–1978).svg, a vectorized version should be made based on this Internet image, the source is a web page of RIA Novosti.
The SVG code of the 1940 version of the Kazakh SSR national emblem was modified based on this file.
Emblem of the Kirghiz Soviet Socialist Republic (1948–1956).svg
The 1948 version of the Kirghiz SSR national emblem is exactly the same as the 1956 version, but the only difference is that the three letters of the Cyrillic letters "ССР" on the lower right have dividing points on the right and are written as "С.С.Р."
The SVG code of the 1948 version of the Kirghiz SSR national emblem was modified based on this file.
Emblem of the Kabardino-Balkar ASSR (1957–1978).svg
This is the original PNG image but there is no corresponding SVG vector image.
The SVG vector image of the Kabardino-Balkar ASSR national emblem from 1957 to 1978 should be made based on this Kalmyk ASSR national emblem. The text contents is detailed in the description below.
This is the original JPG image but there is no corresponding SVG vector image.
The SVG vector image of the Kabardino-Balkar ASSR national emblem from 1978 to 1994 should be made based on this Kalmyk ASSR national emblem. The text contents is detailed in the description below.
What typefaces are being used? If you find out, tell people here, and it will save a lot of time for the more complex requests to be taken. Candidyeoman55 (talk) 13:18, 1 March 2026 (UTC)[reply]
I will probably start to work on the signs in the coming week, but since the quality of these raster images is good, I will probably prioritize creation of the few missing signs from 1971 regulations rather than converting from raster. It should not too complicated since I have the font available from past road sign creations. Note that some of the raster signs are already available (since are the same of the 1969 collection but with a proportional rescaling); I doubt that it is worth recreating identical images --Earthshaker13 (talk) 10:11, 6 March 2026 (UTC)[reply]
Thanks so much! I did think that some of these could be identical to similar, already-vectorised signs introduced with the 1969 circular, but i didn't feel confident removing the raster duplicates as I'm not an expert on the subject. FaviFake (talk) 10:35, 6 March 2026 (UTC)[reply]
This is the original JPG image but there is no corresponding SVG vector image.
I propose to make a vectorized national emblem of Chuvash ASSR (1937–1978) based on this SVG vector image of the pre-1978 Komi ASSR national emblem. At the same time, all the state name texts on the shield and all the motto text on the cloth strip below, except the four Cyrillic letters "АССР" at the sub-top, were removed and replaced with the state name texts and motto texts in the Chuvash ASSR national emblem. The format and typesetting shall be based on all the texts on the Chuvash ASSR emblem, but the sub-top texts (including a two-line Cyrillic texts "ЧУВАШСКАЯ/ЧӐВАШ" in the left, and a single-line Cyrillic texts "АССР" in the right) match to the original JPG image.
This is the version of the national emblem of Chuvash ASSR after 1978. All the text above the shield (excluding the two-line Cyrillic letters "ЧУВАШСКАЯ АССР/ЧӐВАШ АССР" at the sub-top, match to the original JPG image) and all the motto text on the strip below should be extracted intact from this emblem and transplanted into a new SVG file based on the pre-1978 national emblem of Komi ASSR.
I can also edit PrawOrdynWP odznk pam (2012).png, but only if I should use the elements from PrawOrdynWP oznk rozp (2012).svg without any changes — meaning the figure, the horse, and the dragon. In that case, I would only re-vectorize the background symbols.
If you need a vectorization that exactly matches the original raster image, then someone else would need to do that.
It needs to be done without any changes, so I will have to wait for someone else. Nevertheless, thank you very much for the other vectorizations. Bastruk (talk) 22:09, 28 February 2026 (UTC)[reply]
First, an SVG version of the "Grand Cross Star#5" needs to be created, similar to the way the files were prepared in Category:SVG orders of Poland for other Polish orders. Next, "→Starting Point#2", the sash with the Grand Cross Star inside and the medal attached (using grey-black colors from the references, and the cross from "Insignia #4+5" in black and gold with crown). After that, please adjust the colors of the sash and ribbons, update the medals, and include the newly created Grand Cross (File:Order Virtuti Militari - Gwiazda Krzyża Wielkiego.svg). The elements should be arranged according to the same wearing instructions shown in "Wearing of the insignia of the Virtuti Militari Order (.JPG)".
In Military Cross Order case, all elements are already vectorized. There are only three classes (not five), so the placement should correspond to classes 2+3+4 in the Polonia Restituta ("→Starting Point"), meaning: #1 left chest, #2 neck, #3 neck with Grand Cross Star on the left chest.
please overwrite the existing files (Ribbon#4 class III, Ribbon#5 class II and Ribbon#6 class I). Replace their current colors with the blue and red used in: Ribbon#1 class III, Ribbon#2 class II and Ribbon#3 class I. This is to ensure color consistency with the vectorized insignia from Request 2 (Wearing of the insignia of the Military Cross) and Request 4 (Rosette)
For the 4th request, please extract the rosette from the ribbons (Ribbon#6 class I and Ribbon#5 class II) + based on the same colors vectorize the wstążka
I believe the most difficult part will be vectorizing the "Grand Cross Star#5" from Request 1. The remaining requests should mainly involve copying and pasting elements within the SVG editor and adjusting colors accordingly(?).
--Bastruk (talk) 23:53, 27 February 2026 (UTC)[reply]
I'm a bit busy at the moment, but i might finish a few more of these requests later on :) This shouldn't deter anyone else from contributing though. ᛅᛒᛁᛘᚢᛋ (talk) 20:04, 1 March 2026 (UTC)[reply]
Request 2 Done@Bastruk: I haven't added a description yet, see if you cant add one in English and Polish, and tell me if you need anything to be done differently with the graphic :) ᛅᛒᛁᛘᚢᛋ (talk) 09:04, 5 March 2026 (UTC)[reply]
@Abemos On position 3, the Grand Cross Star should be on the other side (on the left chest, but from the perspective of the person awarded). Sorry for the confusion Bastruk (talk) 09:12, 5 March 2026 (UTC)[reply]
@Abemos And if the eagle on these awards is just a pasted raster graphic placed onto the vector star/medal, I have found a properly vectorized eagle that you could use instead (the one on Polonia Restituta is the pre-1928 version) → File:Herb Polski.svgBastruk (talk) 09:32, 5 March 2026 (UTC)[reply]
I should've fixed the main issues now. The eagle is vectorized and is the one used on the "starting point" svg. I didn't want to use to detailed of a graphic on such a small part of the svg. I can perhaps do something in the middle, using the file you just sent as a starting point? ᛅᛒᛁᛘᚢᛋ (talk) 09:37, 5 March 2026 (UTC)[reply]
I also think the buttons are still spaced too far apart, now vertically (they are almost touching the bottom, unlike in the original version). Bastruk (talk) 10:20, 5 March 2026 (UTC)[reply]
Hello, can you pleace create vector SVG file of the flag of the Security Information Service (BIS) adopted in 2020. I would like to ask you first to correct bad SVG vectorization of BIS Emblem already created. (Bad vectorization of eagle head, SVG tweaks, correction of red colour inside the emblem etc.) Visual of the flag (Flag proportion 2:3) is inside video file on this site.[1] (w:en:List of Czech flags##Banners of special forces) Thank you. --ThecentreCZ (talk) 02:32, 3 March 2026 (UTC)[reply]
@Bastruk: I like the many references you found, and was wondering how exactly/what style you want the badge in. Should it be a simple graphic like the -jpg or should it look like a badge as in reference 2. Also, do you think that the font should be outlined like in the jpg, or be filled out like in reference 2, or even be a thin font like the pdf suggests? :) ᛅᛒᛁᛘᚢᛋ (talk) 09:29, 9 March 2026 (UTC)[reply]
Hey @Abemos, I think a simple style like the .jpg, with a 2d representation of the raised 3d text seen in [4] or [6], so it would need some kind of outline. Bastruk (talk) 17:17, 9 March 2026 (UTC)[reply]
Hey @Bastruk: Tell me what you think of the one I just made, and if any adjustments or differences are needed. If not, I'll create the silver badge in the same style :) ᛅᛒᛁᛘᚢᛋ (talk) 09:37, 10 March 2026 (UTC)[reply]
Thank you for adding to vectorizations, my own graphical skills for uploading unencoded characters (particularly 篆書) is sometimes a bit rudimentary. This one is beautifully done
Could someone please create an SVG version of signatures of Henryk Floyar-Rajchman and Ignacy Matuszewski, available here (left is Henryk Floyar-Rajchman, right is Ignacy Matuszewski) --Bastruk (talk) 18:42, 9 March 2026 (UTC)[reply]
This coat of arms is the one used in the Spanish flag file before 1981. I would appreciate it if you could recreate this coat of arms in a high-quality image. I checked a few years ago and found something out of alignment, but I've put my hands on graphic work for personal reasons, so I've come to ask for it. --Tcfc2349 (talk) 01:54, 11 March 2026 (UTC)[reply]
It's just that I'm redrawing it in the current style. If you zoom in closely, there are crooked or misaligned parts everywhere, so it needs to be corrected. I'm sorry that I haven't been able to explain clearly recently because I haven't been doing Wikimedia Commons activities well. --Tcfc2349 (talk) 11:50, 19 March 2026 (UTC)[reply]
@NaBUru38: The current maps may have been rotated to maximise the area of the circuit in the image. Is it a good idea to reduce this area by rotating it so that north is up? cmɢʟee ⋅τaʟκ13:01, 17 March 2026 (UTC)[reply]
This section is resolved and can be archived. If you disagree, replace this template with your comment. Milan Szymon Szulc (talk) 10:57, 21 March 2026 (UTC)
The front wheel in this sign looks like it was accidentally duplicated. There seem to be two overlapping circles instead of one. Could anyone make the front wheel look like a perfect circle like the back wheel? --FaviFake (talk) 20:47, 13 March 2026 (UTC)[reply]
Also shown here: [4] on the page 159; and [5] page 403
Relief of the Virgin Mary and Child from Vidoštak in Vidovo Polje near Stolac. Can someone make a graphic representation of this work? Thanks!--Herald.herlad (talk) 12:20, 15 March 2026 (UTC)[reply]
Graphist opinion(s)
Commons:Village pump/Technical. Need some SVG help
This section is resolved and can be archived. If you disagree, replace this template with your comment. OrdinaryScarlett (talk) 21:59, 21 March 2026 (UTC)
Hello, could someone please fix this flag SVG to match the intended design? The white symbols do not match, and the star's color is incorrect. Thanks! --Yovt (talk) 19:31, 21 March 2026 (UTC)[reply]
Graphist opinion(s)
Re non-matching colour, our thumbnail generator rsvg makes colours slightly darker than what is specified in the SVG code. A workaround is to pre-brighten it but it will then be too bright should the bug be fixed. cmɢʟee ⋅τaʟκ00:59, 22 March 2026 (UTC)[reply]
What Cmglee said. Also, I fixed the shape which seemed wrong. If you need me to continue and copy the shape from the raster graphic 1:1, let me know. ᛅᛒᛁᛘᚢᛋ (talk) 07:47, 22 March 2026 (UTC)[reply]
Hello @Abemos, thanks for tackling this request. The shape is still different from the raster graphic: too thin and the star on my end doesn't match. Overall the symbol should be bolder and more triangle-like, if this could possibly be fixed 1:1 I would really appreciate that, thanks! Yovt (talk) 22:41, 22 March 2026 (UTC)[reply]